2016년 6월 8일

Papers

Research papers

 

International Journal Articles

*corresponding author

  1. K.Ransikarbum, N.Kim, S.Ha, R.Wysk, and L.Rothrock, 2017, “A Highway-Driving System Design Viewpoint using an Agent-based Modeling of an Affordance-based Finite State Automata”, IEEE Access.
  2. B Sarkar, R Guchhait, M Sarkar, S Pareek, and N.Kim*, 2019, “Impact of safety factors and setup time reduction in a two-echelon supply chain management”, Robotics and Computer-Integrated Manufacturing 55, 250-258.
  3. B Sarkar, M Tayyab, N Kim*, and MS Habib, 2019, “Optimal production delivery policies for supplier and manufacturer in a constrained closed-loop supply chain for returnable transport packaging through metaheuristic approach”, Computers & Industrial Engineering.
  4. YG Oh, K Ransikarbum, M Busogi, D Kwon ,and N Kim*, 2019,  “Adaptive SVM-based real-time quality assessment for primer-sealer dispensing process of sunroof assembly line” , Reliability Engineering & System Safety, 184, 202-212.
  5. J Lee, D Kwon, N Kim*, and C Lee, 2019,  “PHM-based wiring system damage estimation for near zero downtime in manufacturing facilities”, Reliability Engineering & System Safety, 184, 213-218.
  6. HY Jeong, E Lee, S Ha, N Kim*, and YC Jun, 2019, “Multistable Thermal Actuators Via Multimaterial 4D Printing”, Advanced Materials Technologies, 4(3), 1800495.
  7. M Busogi, D Song, SH Kang, and N Kim*, 2019, “Sequence Based Optimization of Manufacturing Complexity in a Mixed Model Assembly Line”, IEEE Access, 7, 22096-22106.
  8. HY Jeong, SC An, IC Seo, E Lee, S Ha, N Kim*, and YC Jun, 2019, “3D printing of twisting and rotational bistable structures with tuning elements”, Scientific reports, 9(1), 324.
  9. B Sarkar, W Ahmed, and N.Kim*, 2018, “Joint effects of variable carbon emission cost and multi-delay-in-payments under single-setup-multiple-delivery policy in a golobal sustainable supply chain” Journal of Cleaner Production, 185, 421-445
  10. S.Ha, K.Ransikarbum, H.Han, D.Kwon, H.Kim, and N.Kim*, 2018, “A Dimensional Compensation Algorithm for Vertical Bending Deformation of 3D printed Parts in Selective Laser Sintering” Rapid Prototyping Journal, 24(6)
  11. J Lee, D Kwon, N Kim* and C Lee, 2018, “PHM-based wiring system damage estimation for near zero downtime in manufacturing facilities” Reliability Engineering & System Safety Journal
  12. YG Oh, K Ransikarbum, M Busogi, D Kwon and, N Kim*, 2018, “Adaptive SVM-based real-time quality assessment for primer-sealer dispensing process of sunroof assembly line”, Reliability Engineering & System Safety
  13. B Sarkar, A Majumder, M Sarkar, N Kim*, and M Ullah, 2018, “Effects of variable production rate on quality of products in a single-vendor multi-buyer supply chain management”, The International Journal of Advanced Manufacturing Technology 99 (1-4), 567-581
  14. HY Jeong, E Lee, S Ha, N Kim*, and YC Jun, 2018, “Multistable Thermal Actuators Via Multimaterial 4D Printing”, Advanced Materials Technologies, 1800495
  15. K Ransikarbum, N Kim*, S Ha, RA Wysk, and L Rothrock, 2018, “A Highway-Driving System Design Viewpoint Using an Agent-Based Modeling of an Affordance-Based Finite State Automata”, IEEE Access 6, 2193-2205
  16. D.Kwon, E.Park, S.Ha, and N.Kim*, 2017, “Effect of Humidity Changes on Dimensional Stability of 3D Printed Parts by Selective Laser Sintering,”International Journal of Precision Engineering and Manufacturing, 18(9),pp.1275-1280.
  17. J. Kwon, H. Park, Y. Park, and N. Kim*, 2017, “Potentials of additive manufacturing with smart materials for chemical biomarkers in wearable applications,” International Journal of Precision Engineering and Manufacturing – Green Technology, 4(3), pp. 335-347.
  18. M. Busogi and N. Kim*, 2017, “Analytical Modeling of Human Choice Complexity in a Mixed Model Assembly Line Using Machine Learning-based Human in the Loop Simulation,” IEEE Access, 5, pp. 10434-10444.
  19. M. Busogi, H. Ryu, D. Shin, Y. Oh, and N. Kim*, 2017, “Weighted affordance-based agent modeling and simulation in emergency evacuation,” Safety Science, 96, pp. 209-227.
  20. M. Busogi, K. Ransikarbum, Y. Oh, and N. Kim*, 2017, “Computational Modellling of Manufacturing Choice Complexity in A Mixed Model Assembly Line,” International Journal of Production Research, 55(20), pp. 5976-5990.
  21. J. Ma and N. Kim*, 2017, “Electronic Part Obsolescence Forecasting based on Time Series Modeling,” International Journal of Precision Engineering and Manufacturing, 18(5), pp. 771-777.
  22. K. Ransikarbum, S. Ha, J. Ma, and N. Kim*, 2017, “Multi-objective optimization analysis for part-to-printer assignment in a network of 3D fused deposition modeling,” Journal of Manufacturing Systems, 42(1), pp. 35-46.
  23. J. Ma and N. Kim*, 2016, “Optimal Product Design for Life Cycle Assessment (LCA) with the Case Study of Universal Motors,” International Journal of Precision Engineering and Manufacturing, 17(9), pp. 1229-1235.
  24. H. Ryu, N. Kim, J. Lee, and D. Shin, 2016, “An Affordance-Based Model of Human Action Selection in a Human–Machine Interaction System with Cognitive Interpretations,” International Journal of Human-Computer Interaction, 32(5), pp. 402-414.
  25. J. Kim, M. Busogi, N. Kim, C. Ahn, E. Paik, M. Choi, E. Choi, and K. Kim, 2014, “Preliminary Research on an Agent-Based Modeling and Simulation in Demographic Study.,” International Journal of Applied Engineering Research, 9(23), pp. 18697-18704.
  26. J. Joo, N. Kim*, R. Wysk, L. Rothrock, Y. Son, Y. Oh, and S. Lee, 2013, “Agent-based simulation of affordance-based human behaviors in emergency evacuation”, Simulation Modeling Practice and Theory, 32, pp. 99-115.
  27. K. Kim, N. Kim*, S. Jung, D. Kim, Y. Kwak, and G. Kyung, 2012, “A Radically Assembled Design-Engineering Education Program with a Selection and Combination of Multiple Disciplines”, International Journal of Engineering Education, 28(4), pp. 904-919.
  28. N. Kim, D. Shin, and S. Hur, 2012, “A Model for Determining Optimal Batch Sizes for Product Quality Assurance with Material- and Process-induced Variability under Open Supply Chain Environments”, Information-International interdisciplinary journal , 165(12C), pp. 6043-6062.
  29. J. Ma, N. Kim*, and L. Rothrock, 2011, “Performance Assessment in an Interactive Call Center Workforce Simulation,” Simulation Modelling Practice and Theory, 19(1), pp. 227-238.
  30. L. Rothrock, R. Wysk, N. Kim, D. Shin, Y. Son, and J. Joo, 2011, “A Modelling Formalism for Human-Machine Cooperative Systems,” International Journal of Production Research, 49(14), pp. 4263-4273.
  31. N. Kim, D. Shin, R. Wysk, and L. Rothrock, 2010, “Using Finite State Automata (FSA) for the Formal Modeling of Affordances in Human-Machine Cooperative Systems,” International Journal of Production Research, 48(5), pp. 1303-1320
  32. D. Shin, J. Park, N. Kim*, and R. A. Wysk, 2009, “A Stochastic Model for the Optimal Batch Size in Multi-step Operations with Process and Product Variability,” International Journal of Production Research, 47(14), pp. 3919-3936

Domestic Journal Articles

  1. D. Song, Y. Oh, and N. Kim*, 2016, “Study on Correlation-based Feature Selection in an Automatic Quality Inspection System using Support Vector Machine (SVM),” Journal of the Korean Institute of Industrial Engineers, 42(6), pp. 370-376.
  2. Y. Oh, H. Han, D. Shin, D. Kim, and N. Kim*, 2015, “Framework for Adaptive ERP Systems Using the Ontology Model of a Manufacturing Supply Chain,” ” Journal of the Korean Institute of Industrial Engineers, 41(4), pp. 344-351.
  3. Y. Oh, I. Ju, W. Lee, and N. Kim, 2015, “Modeling and Implementation of the Affordance-based Human-Machine Collaborative System,” Journal of the Korean Institute of Industrial Engineers, 41(1), pp. 34-42.
  4. Y. Oh, H. Park, A. Yoo, N. Kim*, Y. Kim, D. Kim, J. Choi, S. Yun, H. Yang, 2013, “A Product Quality Prediction Model Using Real-Time Process Monitoring in Manufacturing Supply Chain,” Journal of the Korean Institute of Industrial Engineers, 39(4), pp. 271-277.
  5. S. Ha, S. Park, H. Hong, and N. Kim*, 2012, “Study on Gesture and Voice-based Interaction in Perspective of a Presentation Support Tool”, Journal of Ergonomic Society of Korea, 31(4), pp. 593-599.
  6. J. Joo and N. Kim, 2011, “Modeling and Simulation of Emergent Evacuation Using Affordance-based FSA Models,” Journal of the Korean Institute of Industrial Engineers, 37(2), pp. 96-104.

 

Conference Proceedings

  1. DM Kim, E Park, N Kim*, and HW Park,  “Experimental Investigation on Tool Wear During the Milling Processes for the Post-Processing of Selective Laser Melted Inconel 718 Alloys”, ASME 2018 13th International Manufacturing Science and Engineering Conference, June.18, 2018.
  2. J. Kim, N. Kim, E. Paik, C. Lee, and J. Bae, “Practical Application of Wedding Ring in Agent-based Demographic Simulation,” Proceedings of the 2017 Winter Simulation Conference (WSC), Las Vegas, NV, USA, Dec. 3-6, 2017.
  3. S.Ha, K.Ransikarbum, and N.Kim,”Phenomenological deformation patterns of 3D printed products in a selective laser sintering process,” In Proceeding in the 18th International Conference on Industrial Engineering,Seoul,Republic of Korea,Oct.10-12,2016.
  4. E.Park, H.Kim, S.Lee, and N.Kim,”Improving the Adhesive Strength of Carbon Material-reinforced Composite for Fused Deposition Modeling (FDM),”In Proceeding in the 18th International Conference on Industrial Engineering,Seoul,Republic of Korea,Oct.10-12,2016.
  5. N.Kim, J.Kim, S.Ha and I.Jang,”Lightweight Design of a Reference Jig Using Topology Optimization and Additive Manufacturing,”In Proceeding in the 18th International Conference on Industrial Engineering,Seoul,Republic of Korea,Oct.10-12,2016.
  6. K.Ransikarbum, S.Ha, E.Park, J.Ma, and N.Kim,”A Framework for Part Orientation Selection in Additive Manufacturing Using Analytic Hierarchy Process (AHP),”In Proceeding in the 18th International Conference on Industrial Engineering,Seoul,Republic of Korea,Oct.10-12,2016.
  7. E.Park, J.Kim, H.Park, and N.Kim,”Surface modification of an additive manufacturing part via the large pulsed electron beam (LPEB),”In Proceeding in the 18th International Conference on Industrial Engineering,Seoul,Republic of Korea,Oct.10-12,2016.
  8. S.Ha, E.Park, D.Kwon, and N.Kim,”Hygroscopic swelling behavior of Nylon 12 parts produced via selective laser sintering process,”In Proceeding in the 18th International Conference on Industrial Engineering,Seoul,Republic of Korea,Oct.10-12,2016.
  9. K.Ransikarbum, J.Ma, and N.Kim,”A Process Planning Perspective Using Multi-criteria Decision-making for The Build Chamber Utilization in Additive Manufacturing,”In Proceeding in the 18th International Conference on Industrial Engineering,Seoul,Republic of Korea,Oct.10-12,2016.
  10. J.Kwon, N.Kim,”Mechanical Properties on Polymers for 3D Printing Fabrication of Wearable Applications,”In Proceeding in the 18th International Conference on Industrial Engineering,Seoul,Republic of Korea,Oct.10-12,2016.
  11. J. Park, S. Ha, E. Park, D. Kwon, and N. Kim, “Hygroscopic Swelling Behavior of 3D Printed Parts due to Changes in Environmental Conditions,” Proceedings of the ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Raleigh, NC, USA, Aug. 21-24, 2016.
  12. J. Kim, K. Ransikarbum, N. Kim, and E. Paik, “Agent-based simulation modeling of low fertility trap hypothesis,” Proceedings of the 2016 Annual ACM Conference on Principles of Advanced Discrete Simulation, Banff, CA, May 15-18, 2016.
  13. J. Kim and N. Kim, “Preliminary Research on an Agent-Based Simulation of Economic Life Cycle in Demography,” Proceedings of Asia Simulation 2015, Jeju, Republic of Korea, Nov. 4-7, 2015.
  14. Y. Oh, M. Busogi, N. Kim, and D. Kim, “A SVM-based Quality Assessment using Thermal Image DATA in Sealer Dispensing Process,” Proceedings of International Conference on Operations Excellence and Service Engineering 2015, Orlando, FL, USA, Sept. 10-11, 2015. (BEST PAPER AWARD)
  15. M. Busogi, W. Lee, Y. Oh, and N. Kim, “Computation of Manufacturing Complexity in a Mixed Model Assembly,” Proceedings of International Conference on Operations Excellence and Service Engineering 2015, Orlando, FL, USA, Sept. 10-11, 2015.
  16. S. Ha, H. Han, D. Kwon, N. Kim, H. Kim, C. Hwang, H. Shin, and K. Park, “Systematic Dimensional Calibration Process for 3D Printed Parts in Selective Laser Sintering,” Proceedings of the ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Boston, MA, USA, Aug. 2-5, 2015.
  17. J. Kim, M. Busogi, N. Kim, C. Ahn, E. Paik, M. Choi, E. Choi, and K. Kim, 2014, “An Agent-Based Approach in Demographic Research: Preliminary Study on Korean Population Dynamics,” Jeju, South Korea, July, 2014
  18. Y. Oh, I. Ju, and N. Kim, “Simulation of an affordance-based human-machine cooperative control model using an agent-based simulation approach,” LNCS, 9171(1), pp. 459-466, HCII2013, Los Angeles, CA, USA, Aug. 2-7, 2015
  19. N. Kim et al., “Modeling of a Human Decision-making Process with Prospect Theory,” LNCS, 8023(1), pp. 459-466, HCII2013, Las Vegas, NV, USA, July 21-26, 2013
  20. N. Kim et al., “Bayesian Affordance-Based Agent Model for Wayfinding Behaviors in Evacuation Problems,” LNCS, 8025(1), pp. 279-306, HCII2013, Las Vegas, NV, USA, July 21-26, 2013
  21. A. Yoo, Y. Oh, H. Park, and N. Kim, “A product quality monitoring framework using SVM-based production data analysis in online shop floor controls,” Proceedings of the 2013 Industrial and Systems Engineering Research Conference, San Juan, PR, USA, May 18-22, 2013.
  22. N. Kim, D. Shin, and B. Kim, “A Framework for Description of Manufacturing Data Interoperability,” Proceedings of FAIM 2012, International Conference of Flexible Automation and Intelligent Manufacturing, Helsinki, Finland, June 10-23, 2012.
  23. N. Kim, D. Shin, and S. Hur, “A methodology for determining batch sizes for quality assurance products with material- and process-induced variability under an open supply chain environment,” Proceedings of the 7th ICLS 2012, International Congress on Logistics and SCM systems, Seoul, Korea, June 7-9, 2012.
  24. N. Kim, et al., “Human Behavioral Simulation Using Affordance-based Agent Model,” LNCS, 6761(1), pp 368-377, HCII2011, Orlando, FL, USA, July 09-14, 2011
  25. N. Kim, et al., “An Affordance-based Formalism for Modeling Human-involvement in Complex Systems for Prospective Controls,” Proceedings of the 2010 Winter Simulation Conference, Baltimore, MD, USA, Dec. 05-08, 2010
  26. L. Rothrock, R. Wysk, N. Kim, D. Shin, Y. Son, and J. Joo, “A Formalism for Human-Machine Cooperative Systems,” Proceedings of International Conference on Production Research, Shanghai, China, August 2-6, 2009 (The special session dedicated to Dr. Ezey DarEl).
  27. N. Kim, J. Joo, L. Rothrock, and R. Wysk, “An Affordance-based Modeling Approach to Human-involved Systems for Prospective Controls,” Proceedings of Industrial Engineering Research Conference 2009, Miami, FL, May 30-June 3, 2009 .
  28. K. Ransikarbum, N. Kim, R. Wysk, and L. Rothrock, “Validation of Affordance-based Finite State Automata Modeling,” Proceedings of Industrial Engineering Research Conference 2009, Miami, FL, May 30-June 3, 2009 .
  29. S. Seo, N. Kim, J. Joo, R. Wysk, and L. Rothrock, “Design of the Model Framework for Human-involved Systems,” Proceedings of Industrial Engineering Research Conference 2009, Miami, FL, May 30-June 3, 2009 .
  30. N. Kim, D. Shin, R. Wysk, and L. Rothrock, “The hierarchical modeling of human planning activities with Affordances using Finite State Automata (FSA),” Proceedings of Industrial Engineering Research Conference 2008, Vancouver, Canada, May 17-21, 2008.
  31. H. Thiruvengada, N. Kim, L. Rothrock, and R. Wysk, “A systematic approach for developing a computable model for Gibson’s affordance using Finite State Automata,” Proceedings of Industrial Engineering Research Conference 2008, Vancouver, Canada, May 17-21, 2008.
  32. N. Kim, L. Rothrock, R. Wysk, and D. Shin, “A Formalism for Affordance using Finite State Automata in Human-Machine Cooperative Systems,” Proceedings of Industrial Engineering Research Conference 2007, Nashville, TN, May 19-23, 2007.